Washington State trucks need to make sure that they are carrying their chains as of November 1st. That’s next Friday. To make sure you are prepared, here’s the list of requirements for Washington, Oregon, Idaho, and California:
Washington:
Chains must be carried November 1 through April 1. It takes five chains to
comply with the requirement. However, all vehicles of more than 10,000 pounds
gross vehicle weight must carry two extra chains if road conditions require the
use of more chains, or if chains in use are broken or otherwise useless. Chains
must have two sides attached with cross-sections. Cables can be permitted.
Plastic chains are prohibited.
Oregon:
OR law applies to ALL highways in the state. Signs advise when you are required
to carry chains and when you are required to use them. You will need to have
six chains on hand to comply in Oregon.
Idaho:
Officials in ID can determine, at any time, that Lookout Pass on I-90, Fourth
of July Pass on I-90 or Lolo Pass on Highway 12 are unsafe. When this occurs,
signs will alert you to chain up.
California:
CA does not require trucks to carry chains during any specified time period.
When the weather hits, it takes at least eight chains for a standard
tractor-trailer configuration to comply with the regulations. Conventional tire
chains and cable chains, as well as other less conventional devices such as “Spikes Spiders,” are permitted. Trucks with cable-type
chains are legal, but may be restricted at times if severe conditions are
occurring; this happens frequently in the higher elevations such as Donner
Pass. Automatic chaining systems are permitted in the state; however, you may
still be required to add additional “traditional” chains to fully comply with
the placement requirements.
UWT has produced a video on Chain Training with the help of TC Trans. The video covers: key tools to use while chaining up, how to chain up without having to move your truck, and how to make sure you are legal for the specifications of Washington, Oregon, Idaho, and California for truck and trailer:
Remember, carrying chains also adds to your total gross weight. Most chain sets weigh approximately 300lbs.
For a comprehensive list of all states, check out our Chain Laws, State-by-State post.
